Spanish
 


 

Apart from AlMg (AlMg3 EN AW 5754-H111/H12/H22 y 5083-H111) sheets and plates, mentioned in another section of the website, we can offer specific state alloys for the building of any kind of aluminium ships.

According to quantity it can be supplied in different widths and lengths.

Upon request, we can serve these sheets with their certificate of inspection.
   

ALUMINIUM-MAGNESIUM ROUND BARS

ALUMINIUM-MANESIUM ROUND TUBES

         Upon request, minimum quantity.

 

ALUMINIUM-MAGNESIUM EQUAL SIDE ANGLES

ALUMINIUM-MAGNESIUM UNEQUAL SIDE ANGLES

  UPON REQUEST

  BULB FLAT BAR

  UPON REQUEST

  

 

 
 

 

  ALUMINIUM-MAGNESIUM FLAT BARS


  UPON REQUEST
  Standard length: 6.000 mm.

STEEL-ALUMINIUM BIMETALLIC FLAT BARS


Standard length:3.700 mm.

 

COMPOSITION:
 

Coating: 6mm thickness 5086 H111 aluminium or equivalent
Intermediate layer: 9,5mm thickness 1050 H111 aluminium or equivalent
Base support: 19mm thickness ASTM A 516 steel or equivalent

Plates and sheets can be obtained up to 1300mm.

Note: The width of the plate must be at least 4 times wider than the plate to weld.

Due to the wide range of products for ship building we can provide, only a few models are shown here.
 
 

Due to the wide range of products for ship building we can provide, other models. Some are shown here.


Always upon request

 

Fast ferry built by Izar (former E.N. Bazar) in San Fernando (Cadiz)

 
   
© ALU-STOCK,S.A. 2007       Phone: +34.945.290097       Fax: +34.945.290088       1 Landalucia St. Vitoria E-01015      Site Map      Legal Notice