Aluminium round bar, manufactured in alloy 2033 T3, an alloy with very good machinability and high mechanical characteristics but which does not contain lead, making it the ideal substitute for alloys 2011, 2007 or 2030. Ideal for complex parts for all types of industries,
In calibrated quality, the tolerances of the bar are tighter, which avoids roughing operations depending on the part to be made.
The Ø6 drawn aluminium round bar is made of EN AW 2033 alloy. An aluminium alloy belonging to the 2000 family, with copper as the main alloying element.
This alloy, which contains no lead or tin, has been developed to replace alloys 2011, 2007 and 2030, which do not comply with RoHS requirements due to their composition. With the correct machine parameter settings, this alloy is capable of meeting high machining requirements.
This aluminium alloy has the following composition under standard EN 573-3:
|
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Bi |
Zn |
Ti |
Ni |
Others |
Al |
|
|
Indiv. |
Total |
||||||||||||
|
Min |
0.10 |
– |
2.20 |
0.40 |
0.20 |
– |
0.05 |
– |
– |
– |
|
|
|
|
max. |
1.20 |
0.70 |
2.70 |
1.00 |
0.60 |
0.15 |
0.80 |
0.50 |
0.10 |
0.15 |
0.05 |
0.15 |
Rest |
Bars manufactured in EN AW 2033 alloy are supplied in T3, T8 or T6 treatment states depending on the extruded or calibrated quality of the alloy.
Their mechanical properties are as follows:
|
Condition |
Main measurement mm |
Rm MPa |
Rp0.2 MPa |
A min. % |
HBW hardness* |
||
|
min. |
max. |
min. |
Max. |
||||
|
T3 |
≤ 30 |
370 |
– |
240 |
– |
7 |
100 |
|
30 < d ≤ 80 |
340 |
– |
220 |
– |
7 |
100 |
|
|
T8 |
≤ 80 |
370 |
– |
270 |
– |
8 |
100 |
|
T6 |
≤ 80 |
370 |
– |
250 |
– |
8 |
100 |
|
80 < d ≤ 250 |
340 |
– |
220 |
– |
8 |
100 |
|
*Reference value for informational purposes.
The EN AW 2033 alloy has the following physical properties:
|
Elastic modulus |
Coefficient of expansion per °C (20°-100°C) |
Thermal conductivity W/mK |
Resistivity µW·cm(2) /cm |
|
70,000 MPa |
22.9 x 10-6 |
151 (T3) 173 (T8) |
4.6 |
The general behaviour of the EN AW 2033 aluminium alloy is as follows in the areas listed below:
– Corrosion resistance: Low.
– Weldability: Low.
– Machinability: Excellent.
– Formability: Fair.
– Suitability for anodising: Low.
The classification is made in the following range: excellent, very good, good, fair and low.
The main applications of the EN AW 2033 alloy are as follows:
– Highly complex parts in all types of sectors, including electrical and electronic due to its compliance with RoHS regulations.
