Standard aluminium profiles
Pneumatic aluminium tubes
We have the following measurements in stock:
| Diameter | Internal Ø tolerance |
Weight |
|---|---|---|
| Ø32 x Ø36 | H11 | 0.576 kg/m |
| Ø40 x Ø45 | H11 | 0.900 kg/m |
| Ø50 x Ø55 | H11 | 1.113 kg/m |
| Ø63 x Ø68 | H11 | 1.388 kg/m |
| Ø80 x Ø86 | H11 | 2.111 kg/m |
| Ø100 x Ø106 | H12 | 2.621 kg/m |
| Ø125 x Ø132 | H12 | 3.813 kg/m |
| Ø160 x Ø170 | H13 | 6.996 kg/m |
| Ø200 x Ø210 | +1 / -0 | 8.692 kg/m |
The standard supply length is 3,200 mm
OTHER CHARACTERISTICS
_Material: EN AW 6063 T6
_Finish: Anodised Class 20 +10/-4 (internal) +10/-8 (external)
-Surface hardness of the anodised layer: 420 HV25 + 130/-30
_Interior roughness:
-Ra radial ≤ 0.6 µm Rmáx radial ≤ 9 µm
-Ra axial ≤ 0.4 µm
MECHANICAL PROPERTIES
Below are the minimum mechanical properties of the material
| Tensile strength Rm min(MPa) |
Yield Strength Rp0.2 min(MPa) |
Elongation A5% min |
Hardness HBW |
|---|---|---|---|
| 245 | 200 | 8 | 80 |
Contact
VBT industrial S.A. de C.VAv.
Laurel 205, Fracc. Industrial El Vergel
38110 Celaya (Guanajuato) - México
Laurel 205, Fracc. Industrial El Vergel
38110 Celaya (Guanajuato) - México