Up

Aluskit® accessories

Internal couplings

Accessories for joining, usually by butt joint, making use of the channel and being fitted internally.

General system coupling

Accessory for perpendicular fastening of profiles. It is positioned by introducing it into a channel of the profile to be joined and then sliding it along the channel or it is introduced by rotating the other profile to be joined in the channel. Once it has been put into position, it is pulled backwards and fastened by tightening the inclined screw included with the accessory.

 

Material Code Series
AC 7004.412.010.0001 Accessory valid for Series 30
AC 7004.412.010.0000 Accessory valid for Series 40 Accessory valid for Series 45

Quick crosspiece coupling

Accessory for perpendicular fastening of two profiles, introducing the base of the accessory into the rail of one of the profiles and attaching it using the captive screw. The screw is then attached with the anchor head nut incorporated until the assembly is fastened together by pressure.

 

Material Code Series
ZMK 7004.412.210.3000 Accessory valid for Series 30
ZMK 7004.412.210.4045 Accessory valid for Series 40 Accessory valid for Series 45

Anti-slide blocker

Accessory for reinforcing the butt joint between two profiles, fastening it in the channels that are not facing the channels of another profile, driving it into its walls.

 

Material Code Series
AC 7004.414.100.4045 Accessory valid for Series 40 Accessory valid for Series 45

Single internal crosspiece coupling

Fitting for creating butt joints between profiles making use of the channel and the central ribs. First of all, after threading the central rib of the profile, the main thread of the accessory is screwed to the profile to be joined. The entire connection then slides along the channel of the other profile and it is finally fastened by tightening the captive screw incorporated in the accessory.

 

Material Code Series
AC 7004.413.020.0M08 Accessory valid for Series 40
AC 7004.413.020.1M08 Accessory valid for Series 45

Double internal crosspiece coupling

Fitting for creating butt joints between profiles making use of the channel and the central ribs. First of all, after threading the central rib of the profile, the main thread of the accessory is screwed to the profile to be joined. The entire connection then slides along the channel of the other profile and it is finally fastened by tightening the captive screw incorporated in the accessory.

 

Material Code Series
AC 70044130100M08 Accessory valid for Series 40 
AC 70044130099M12* Accessory valid for Series 45

 

*For Series 45 profiles it is necessary to add the reducer fitting size M12 to M8

Simple double internal crosspiece coupling

Fastening “U” that is concealed between the profiles to be joined. It is introduced through the channel of the base profile and then the profile to be joined by the accessory tabs is inserted and finally fastened using the captive screws incorporated.

 

Material Code Series
AC 7004.413.029.0M06 Accessory valid for Series 30
AC 7004.413.030.1M06 Accessory valid for Series 45

Short front inner right-angle bracket

Angle bracket that is fastened inside the channel of the profiles to be joined by tightening the M6 captive screw incorporated in it.

 

Material Code Series
AC 7004.534.080.0M06 Accessory valid for Series 30
AC 7004.534.010.0M06 Accessory valid for Series 40 Accessory valid for Series 45

Short rear inner right-angle bracket

Angle bracket that is fastened inside the channel of the profiles to be joined by tightening the M6 captive screw incorporated in it. First of all, the base profile has to be introduced and fastened and then the profile to be joined has to be fitted to the angle bracket, with part of the angle bracket being covered by it.

 

Material Code Series
AC 7004.534.108.0M06 Accessory valid for Series 30
AC 7004.534.110.0M06 Accessory valid for Series 40 Accessory valid for Series 45

Large lateral inner right-angle bracket

Angle bracket that is fastened inside the channel of the profiles to be joined, which have had to be previously mitre-cut at the side part of the joint.

 

Material Code Series
AC 7004.533.008.0M06 Accessory valid for Series 30
AC 7004.533.010.0M06 Accessory valid for Series 40 Accessory valid for Series 45

Large rear inner right-angle bracket

Angle bracket that is fastened inside the channel of the profiles to be joined, which have had to be previously mitre-cut at the external part of the join.

 

Material Code Series
AC 7004.533.108.0M06 Accessory valid for Series 30
AC 7004.533.110.0M06 Accessory valid for Series 40 Accessory valid for Series 45

Anti-rotation aluminium coupling

Angle bracket that is fastened inside the channel of the profiles to be joined, which have had to be previously mitre-cut.

 

Material Code Series
AC 7004.414.0454500 Accessory valid for Series 45