Up

Falkit® Skirting boards

LEDkit skirting board

New skirting boards specially designed to include lighting by LED strips inside. By introducing one of these strips into the housing designed for this purpose, indirect lighting can be provided for decorative or signage purposes.

 

Its design allows it to be installed on both sides, thus allowing simultaneous areas with and without lighting. It can also be combined with our rectangular 85x15 mm skirting board.

 

It can also include a translucent cover to facilitate cleaning it and in turn to act as diffuser of the LED lighting.

 

Its assembly is very easy because it is attached by solvent-based mounting adhesive. For joining corners, aluminium covers with sharp or rounded edges are available.

 

The standard supply length is 6,050 mm On request and in a minimum quantity, and to suit requirements, they can be supplied in other lengths.

 

The profiles can be supplied rough or anodised with a thickness of 15 microns, which is standard, or 20 microns, which is special, for very aggressive environments, in natural colour or electro-coloured anodised: stainless steel, bronze, green or grey, graphite, in satin or gloss polished finish gloss with cotton or repolished (polished + repolished), in standard lacquers from the RAL colour chart, smooth or metallic or in lacquers with velvety metallic design textures, corten steel type, black forged, ash grey, wood effect, etc. or in wood-type lacquered finish.

 

On request, new designs or sizes can be made.

110570 - LEDkit 85x15 Reversible skirting board

110570 - LEDkit 85x15 Reversible skirting board
Code Total
Perimeter
(mm)
Xc
(mm)
Ixc
(cm4)
Yc
(mm)
Iyc
(cm4)
Average
Thickness
(mm)
110570 330.690 6.830 19.525 40.710 0.582 1.4

110571 - LEDkit Pladeyeso skirting board 13x80

Code Total
Perimeter
(mm)
Xc
(mm)
Ixc
(cm4)
Yc
(mm)
Iyc
(cm4)
Average
Thickness
(mm)
110571 251 4.321 11.764 42.502 0.392 1.5