Falkit® System
Falkit® System trimmings
103101 - Starting/finishing U
U-profile for starting or finishing the different panels made with Falkit® profiles, especially indicated for the finest profiles.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103101 | 71.000 | 2.881 | 0.180 | 7.345 | 0.003 | 1.5 |
103303 - Starting/Finishing profile
Starting and finishing profile for use with any Falkit® System profile. In vertical assemblies it can be used as a corner piece.
Finish | Like all Falkit® System profiles, it may be anodised or lacquered in a variety of colours both from the RAL colour chart and special.
Length | The standard supply length is 6,050 mm. On request, other lengths and cutting to size can be supplied.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103303 | 136.619 | 8.855 | 0.481 | 7.118 | 0.717 | 1.5 |
103305 - 22 mm side trimming
Side trimming to be used with low or medium height Falkit® profiles.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103305 | 207.590 | 21.343 | 2.772 | 10.852 | 1.743 | 1.5 |
103134 - 30 mm side trimming
Side trimming to be used with medium or large height Falkit® profiles.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103134 | 259.094 | 24.474 | 3.185 | 14.770 | 3.786 | 2.0 |
103301 - Omega trimming 41 mm
Intermediate trimming, between panels, to be used with low height Falkit® System aluminium profiles.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103301 | 193.020 | 21.513 | 0.532 | 6.696 | 1.761 | 1.5 |
103304 - Omega trimming 22 mm
Intermediate trimming, between panels, to be used with medium height Falkit® System aluminium profiles.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103304 | 253.073 | 25.00 | 1.430 | 8.255 | 3.095 | 1.5 |
103131 - Omega trimming 30 mm
Intermediate trimming, between panels, to be used with large height Falkit® System aluminium profiles.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103131 | 304.507 | 27.491 | 3.805 | 13.071 | 5.807 | 2.0 |
103302 - Inner corner piece profile
Profile to be used as an inner corner piece in corners. The channel can be used to insert decorative lighting by means of LED strips.
Profile characteristics:
| Code | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|
| 103302 | 193.270 | 13.762 | 1.312 | 13.745 | 1.313 | 1.5 |
103315-103316 - Curved inner corner piece set
Set of base profiles and cover for creating curved inner corners.
Profile characteristics:
| Code | Reference | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|---|
| 103315 | Base inner corner piece profile | 212.954 | 11.564 | 1.431 | 11.564 | 1.431 | 1.3 |
| 103316 | Curved corner piece cover profile | 129.039 | 13.605 | 3.241 | 6.768 | 5.321 | 1.3 |
103317-103318 - Smooth outer corner piece set
Set of profiles for creating trimmings on outer corners.
Profile characteristics:
| Code | Reference | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|---|
| 103317 | Outer corner piece base profile | 199.160 | 14.107 | 4.981 | 14.107 | 4.981 | 1.5 |
| 103318 | Outer corner piece cover profile | 244.082 | 14.381 | 5.032 | 14.362 | 5.027 | 1.5 |
103309-103319-103320 - Frame trimming profiles
Profiles for creating frame trimmings especially indicated for joins in carpentry work. It consists of two profiles with measurements that adapt to two different holes and a clip-on finishing cover that conceals the fastenings.
Profile characteristics:
| Code | Reference | Total Perimeter (mm) |
Xc (mm) |
Ixc (cm4) |
Yc (mm) |
Iyc (cm4) |
Average Thickness (mm) |
|---|---|---|---|---|---|---|---|
| 103320 | Frame trimming cover profile | 94.828 | 16.615 | 0.023 | 1.691 | 0.565 | 1.5 |
| 103319 | Frame trimming profile 75 mm | 239.072 | 32.369 | 0.832 | 4.787 | 12.287 | 1.5 |
| 103309 | Frame trimming profile 145 mm | 379.218 | 66.520 | 0.958 | 3.150 | 78.131 | 1.5 |
Laurel 205, Fracc. Industrial El Vergel
38110 Celaya (Guanajuato) - México