Up

Aluskit® Solar System

Other materials for the Aluskit® Solar System

Other accessories and various profiles that can be used in the Aluskit® Solar System.

Reinforced T-profile 70x60

T-profile especially recommended for assembling the wedges that give the structure its inclination. Its upper channel as well as its flat wings allow support and attachment of both the plates and the other auxiliary profiles.

 

Code Total
Perimeter
(mm)
Xc
(mm)
Ixc
(cm4)
Yc
(mm)
Iyc
(cm4)
Average
Thickness
(mm)
121121 544.447 29.997 37.486 43.636 13.061 1.5

Crosspiece profile 40x40 3 channels

Structural profile that serves as an upper band in the event of requiring a structure with inclination. The lateral channels allow them to be fastened to the wedge and the upper channel is for support and attaching the photovoltaic panels.

 

Code Total
Perimeter
(mm)
Xc
(mm)
Ixc
(cm4)
Yc
(mm)
Iyc
(cm4)
Average
Thickness
(mm)
140107 509.881 20.511 7.066 19.995 7.805 1.5

Reinforced profile 40x40 4 channels

Structural profile for forming the bands of the system in the case of heavy loads.

 

Code Total
Perimeter
(mm)
Xc
(mm)
Ixc
(cm4)
Yc
(mm)
Iyc
(cm4)
Average
Thickness
(mm)
140101 480.481 20.000 9.176 20.000 9.176 2.5

50x50 profile 4 channels

Structural profile for creating bands, both upper and lower

 

Code Total
Perimeter
(mm)
Xc
(mm)
Ixc
(cm4)
Yc
(mm)
Iyc
(cm4)
Average
Thickness
(mm)
140281 1337.204 45.000 189.879 45.000 189.879 2.5

Profile joining block

Joining block for longitudinal coupling of profiles making use of their channel if required.

 

Code Reference
70044106000150 Profile joining block
70044150224661 A2 Stainless Steel Allen Stud (4u)

Profile fastening clip

Aluminium clip for cross-fastening at any angle of Aluskit® Series 40 profiles.

 

Code Reference
70045264000000 Aluskit fastening clip

25 mm anchoring base profile.

Anchoring base profile for tubular parts and profiles with 25 mm side

 

Code Reference
121125 25 mm anchoring base

40 mm anchoring base profile.

Anchoring base profile for tubular parts and profiles with 40 mm side

 

Code Reference
103121 40 mm anchoring base

50 mm anchoring base profile.

Anchoring base profile for tubular parts and profiles with 50 mm side

 

Code Reference
121135 50 mm anchoring base